Garboli
Belt grinding machine GPS Belt for flat surfaces with a wet working system, suitable for finishing operations on pipes and rods with square and rectangular sections , sheets and plates of stainless steel, iron, aluminum, brass and other metals.
Especially suitable for expansion on laser/plasma or cut sheets.
Sanding of workpieces can also be "dry", in which case a hood is available for collecting dust, which is easily connected to the machine (on request).
Belt grinding machine GPS MODULO (GB) for flat surfaces, suitable for grinding and finishing pipes and bars with square and rectangular sections, as well as sheets and plates made of stainless steel, iron, aluminum, brass and other metals . Especially suitable for enlarging on laser/plasma or cut sheets.
Belt grinding machine SYRIO (GB) is suitable for grinding and finishing on large pieces of square, rectangular section, plates or profiled metal objects of various sizes and metal boxes or structures. The machine is equipped with a table that can be electrically adjusted in height ( for parts, max. Weight kg 180).
The standard version is suitable for processing objects with max. 2500 mm long.
Moreover, it can be equipped with a double speed abrasive belt (9-18 m/s) or inverter equipment to adjust the speed from 10 to 25 m/s.
This device can be used for grinding very short parts as well as deburring and chamfering operations.
Deburring machine GPS Brush (GB) for flat surfaces with “WET” working system, suitable for deburring, brushing and satin finishing on pipes and bars with square and rectangular sections, sheets and plates of stainless steel, iron, aluminum, brass and other metals.
This device is equipped with a brush height regulator and a wear compensation system.
Removal of burrs from workpieces can also be "dry", in this case, an extractor is available to collect dust, which is easily connected to the machine (on request).
The machine for deburring ROTOR-200 (GB) inside and outside "burrs and sharp edges" at the ends of parts subjected to cutting processes.
It is also possible to "remove burrs" from round and oval pipes, square and rectangular sections, irregular profiles made of iron, steel, stainless steel, aluminum and plastic.
Drilling machine FORUS EASY, suitable for perpendicular and angle drilling on round pipes, rectangular profiles, square pipes and metal plates of various sizes and made of various materials such as iron, stainless steel, brass, aluminum and titanium.
The drilling unit is very strong and moves on guides made of reinforced hardened steel. Spindle with a diameter of 90 mm. has an ISO 40 chuck, suitable for drills from 5 to 50 mm. The feed of the boring unit is carried out using a circulating screw ball with a brushless motor. The speed of the drill motor is regulated by the inverter equipment.
Drilling machine with control FORUS (GB) and brushless motors to simplify the work process, without any manual adjustment, suitable for perpendicular and corner drilling on round pipes, rectangular profiles, square pipes and metal plates of various sizes and made of various materials such as iron, stainless steel, brass, aluminum and titanium.
The machine is modular and can be supplied with one or two drilling devices.
The innovative Duo sander (GB), which performs two different operations:
- Groundhog grinding for flat surfaces: finishing and satin work on pipes and bars of square and rectangular section, sheets and plates of stainless steel, iron, aluminum, brass and other metals. Especially suitable for deburring laser/plasma cut or cut sheets.
- "Centerless" grinding: finishing and satin work on straight pipes and round bars (custom equipment).
Automatic feed for flat parts, preliminary arrangement for connection to the dust collector, motor voltage 400 V - 50 Hz, n. 2 abrasive belts with different grits, wrenches, operating instructions.
Grinding machineNOK 150 (GB) suitable for performing cutting and grooving on pipes, bars, profiles with round, square, rectangular and irregular sections.
The standard machine is supplied with the following equipment:
• Side tilt clamping device for making cuts with angles 15°-30°-45°-60° on pipes with a diameter of 20 to 150 mm.
• Working slot for horizontal grinding.
• The speed of rotation of the grinding belt (2800 rpm).
On request, to increase the working capabilities of the machine, additional equipment can be added:
• Centerless preparation system for polishing round pipes.
• Set for "wet" processing.
• Double cutting speed of the abrasive belt (1400-2800 rpm).
Orbital machineGPS Orbital (GB) for rounding edges or removing burrs on flat surfaces subject to oxytresis, laser cutting, plasma cutting, stamping or shearing.
This machine allows you to process metal sheets or flat products with max . 300 mm wide. and max. 150 mm high. This device is equipped with a brush height regulator and a wear compensation system.
Deburring of workpieces can also be "dry", in this case, a dust extraction hood is available that easily connects to the machine (on request).
Planetary grinding machine LPC 135 (GB) with abrasive belts for grinding and finishing with satin. Straight or bent elements made of stainless steel, brass, iron, aluminum and other metals.
Planetary grinding machine LPC 160-WET (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal having a round, oval, elliptical or irregular cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium. The main feature compared to other machines is that our unit is equipped with 2 INDIPEN-DENT motors: 1 for rotating discs and 1 for rotating abrasive belts.
This machine also allows "dry" processing of workpieces, in this in this case, you can put an easy-to-install dust cap.
Planetary grinding machine LPC 160VS (GB) with abrasive belts for grinding and satin finishing Straight or bent products made of stainless steel, brass, iron, aluminum or any other metal with a round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 160VS-WET (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal are round, oval, elliptical or irregular in cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium.
The main feature compared to other machines is that our device is equipped with 2 individual motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
This machine also allows "dry" processing of workpieces, in this case, an easy-to-install dust collection cap can be installed.
Planetary grinding machine LPC 300-WET (GB) "wet" with abrasive belts for grinding and satin finishing of straight and curved products made of stainless steel, brass, iron or any other metal having round, oval, elliptical or irregular cross-section. Especially suitable for processing on light alloy, aluminum and titanium products.
The main feature compared to similar products is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the sanding belts.
This the machine also allows "dry" processing of blanks.
Planetary grinding machine LPC 300/S (GB), consisting of N°2 grinding units on the same STRUCTU-RE: the first head is for grinding, and the second head is for processing straight parts with round, oval, elliptical or irregular cross-section, made of stainless steel, iron, brass and other metals.
This line is supplied ready-to-run with automatic feeding systems suitable for straight tubes.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 300VS-WET (GB) "wet" with abrasive belts for grinding and satin finishing straight and curved products made of stainless steel, brass, iron or any other metal having a round , oval, elliptical or irregular cross-section. Especially suitable for processing on light alloy, aluminum and titanium products.
The main feature compared to similar products is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the sanding belts.
This the machine also allows "dry" processing of blanks.
Planetary grinding machine LPC 500 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal having a round, oval, elliptical or irregular cross-section. The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 500 TE (GB) with abrasive belts, special version with narrow pulleys, suitable for grinding shaped parts, with a bending radius of more than 90 °.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 500-WET (GB) "wet" with abrasive belts for grinding and satin finishing straight and curved products made of stainless steel, brass, iron or any other metal that has a round, oval, elliptical or irregular cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium.
The main feature compared to similar ones is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the grinding belts.
This machine also allows "dry" processing of workpieces, in which case an easy-to-install dust collection cap can be provided.
Planetary grinding machine LPC 90 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products made of stainless steel, brass, iron, aluminum and other metals.
Planetary grinding machine LPC LPC 300 (GB) with abrasive belts for grinding and satin finishing. Straight or bent stainless steel, brass, iron, aluminum or any other metal with round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive tapes.
